EnglishSwivel coupler RD48-51 30mm WLL 200kg
Description
With the Admiral Swivel coupler you can mount two tubes at any angle imaginable. A great example of using this coupler would be bracing a truss with an extra tube. Connecting the couplers is much faster and easier than rotating the shackle around the
tube and tightening it with a butterfly nut. Â
This Swivel coupler has a width of 30 mm and can support up to 200 kg. Available in both silver and black.
Note: Using a safety factor different from the one indicated is at the customer's own risk.
Specifications
- WLL
- 200 kg
- Safety factor
- 5 : 1
- For diameter tube
- 48-51 mm
- Width
- 30 mm
- Material
- aluminium alloy
- Weight
- 0.71 kg
- Colour
- silver
- Finish
- anodized
- Standards & Approvals 1
- in compliance with the Machinery Directive 2006/42/EC annex II
- Standards & Approvals 2
- the following harmonized standards have been applied (or parts/clauses of): EN 12100-1-2010
- Standards & Approvals 3
- part/clauses of the following technical regulations , standards and information papers have been used: German DGUV 17-18, German DGUV 215-313, EN 10204:2004, EN 17206 :2020, BS 7905-1 :2001
Mix & Match
Swivel coupler RD48-51 30mm WLL 200kg
Description
With the Admiral Swivel coupler you can mount two tubes at any angle imaginable. A great example of using this coupler would be bracing a truss with an extra tube. Connecting the couplers is much faster and easier than rotating the shackle around the
tube and tightening it with a butterfly nut. Â
This Swivel coupler has a width of 30 mm and can support up to 200 kg. Available in both silver and black.
Note: Using a safety factor different from the one indicated is at the customer's own risk.
Specifications
- WLL
- 200 kg
- Safety factor
- 5 : 1
- For diameter tube
- 48-51 mm
- Width
- 30 mm
- Material
- aluminium alloy
- Weight
- 0.71 kg
- Colour
- silver
- Finish
- anodized
- Standards & Approvals 1
- in compliance with the Machinery Directive 2006/42/EC annex II
- Standards & Approvals 2
- the following harmonized standards have been applied (or parts/clauses of): EN 12100-1-2010
- Standards & Approvals 3
- part/clauses of the following technical regulations , standards and information papers have been used: German DGUV 17-18, German DGUV 215-313, EN 10204:2004, EN 17206 :2020, BS 7905-1 :2001