Top of the page

SIDELIGHT TOWER

Roll your lights on stage and lift them up with ease.

A versatile solution for both
sidelights and shinlights

Install your fixtures in the Admiral Sidelight Tower, roll it to position, lift the ladder by hand and start lighting the stage!

This all-in-one solution combines transport and use in one practical system.
The Sidelight tower is suitable for theatre luminaires and other stage lighting fixtures.
Its base height of 200 cm can be extended by 100 cm, giving extra reach when needed.

The ladder position can be symmetrical or asymmetrical, offering maximum flexibility.
A symmetrical setup is perfect for compact fixtures such as LED PARs, blinders and strobes.
The asymmetrical setup creates more space at the front, ideal for profile spots, with better focus and aiming options.

Telescopic ladder

The telescopic ladder is the key part of the Sidelight tower.
It consists of a strong ladder frame with two fixed hanging tubes, one at the top and one at the bottom.

Two separate hangers with fork sets are included and can be placed at any height inside the ladder, thanks to the pre-drilled holes. This makes adjusting the position very simple.

This flexible design makes it easy to mount different lighting fixtures and set them at the right height on stage.

Pull handles

The pull handles allow you to raise the ladder smoothly to the required height, with an extension up to 100 cm.
Pull handles on both sides allow two people to lift and lower the ladder with more control.
Once the ladder is in position, a locking pin keeps it securely in place.

For safe operation, load a maximum of 40 kg on the ladder before lifting.
After the ladder is raised and locked, it can be loaded up to 100 kg.

The automatic safety lock adds extra protection: if one of the orange pull handles is released by accident, the ladder locks automatically.

Adjustable roller wheels

The ladder is fitted with roller wheels that help it slide smoothly inside the Sidelight tower.

These wheels are adjustable, allowing you to remove any slack in the ladder.
By pulling the cord aside, you can access the adjustment point.
A simple turn with a screwdriver lets you fine-tune the wheels for a stable and controlled movement.

Extra tubes for shinlights

When the ladder is lifted, extra tubes can be mounted in the bottom side of the Sidelight tower to create shinlights. 
These tubes are mounted on the omega profiles. 
Please be aware that the extra tubes need to be removed before lowering the ladder or during transportation. 

Symmetrical tower

Asymmetrical tower

Specifications

Max load40 kg (before ladder is lifted and secured)
100 kg (after ladder is lifted and secured)
Max load tube50 kg
Diameter tube50 mm
Dimensions (ladder down)(L x W x H) 800 x 600 x 2000 mm including castors
Dimensions (ladder up)(L x W x H) 800 x 600 x 3000 mm including castors
Castor 4 x 100 mm castors with brake
Material (ladder)steel
Material (handles)steel
Material (panels)steel
Material (hanging tubes)aluminium
Weight56 kg
Colourblack gloss 30% (RAL 9005)
handles: orange gloss 30% (RAL 2008)
Finishpowder coated
Standards & Approvals- in compliance with the Machinery Directive 2006/42/EC annex II 
the following harmonized standards have been applied (or parts/clauses of):
- EN1990 Eurocode - Basis of structural design
- EN1993 Eurocode 3 - Design of steel structures
Not includedsidelight tower tube 60 cm with fork set

Accessories

SIDELIGHT TOWER

Roll your lights on stage and lift them up with ease

A versatile solution for both
sidelights and shinlights

Install your fixtures in the Admiral Sidelight Tower, roll it to position, lift the ladder by hand and start lighting the stage!

This all-in-one solution combines transport and use in one practical system.
The Sidelight tower is suitable for theatre luminaires and other stage lighting fixtures.
Its base height of 200 cm can be extended by 100 cm, giving extra reach when needed.

The ladder position can be symmetrical or asymmetrical, offering maximum flexibility.
A symmetrical setup is perfect for compact fixtures such as LED PARs, blinders and strobes.
The asymmetrical setup creates more space at the front, ideal for profile spots, with better focus and aiming options.

Telescopic ladder

The telescopic ladder is the key part of the Sidelight tower.
It consists of a strong ladder frame with two fixed hanging tubes, one at the top and one at the bottom.

Two separate hangers with fork sets are included and can be placed at any height inside the ladder, thanks to the pre-drilled holes. This makes adjusting the position very simple.

This flexible design makes it easy to mount different lighting fixtures and set them at the right height on stage.

Pull handles

The pull handles allow you to raise the ladder smoothly to the required height, with an extension up to 100 cm.
Pull handles on both sides allow two people to lift and lower the ladder with more control.
Once the ladder is in position, a locking pin keeps it securely in place.

For safe operation, load a maximum of 40 kg on the ladder before lifting.
After the ladder is raised and locked, it can be loaded up to 100 kg.

The automatic safety lock adds extra protection: if one of the orange pull handles is released by accident, the ladder locks automatically.

Adjustable roller wheels

The ladder is fitted with roller wheels that help it slide smoothly inside the Sidelight tower.

These wheels are adjustable, allowing you to remove any slack in the ladder.
By pulling the cord aside, you can access the adjustment point.
A simple turn with a screwdriver lets you fine-tune the wheels for a stable and controlled movement.

Extra tubes for shinlights

When the ladder is lifted, extra tubes can be mounted in the bottom side of the Sidelight tower to create shinlights. 
These tubes are mounted on the omega profiles. 
Please be aware that the extra tubes need to be removed before lowering the ladder or during transportation. 

Symmetrical tower

Asymmetrical tower

Specifications

Max load40 kg (before ladder is lifted and secured)
100 kg (after ladder is lifted and secured)
Max load tube50 kg
Diameter tube50 mm
Dimensions (ladder down)(L x W x H) 800 x 600 x 2000 mm including castors
Dimensions (ladder up)(L x W x H) 800 x 600 x 3000 mm including castors
Castor 4 x 100 mm castors with brake
Material (ladder)steel
Material (handles)steel
Material (panels)steel
Material (hanging tubes)aluminium
Weight56 kg
Colourblack gloss 30% (RAL 9005)
handles: orange gloss 30% (RAL 2008)
Finishpowder coated
Standards & Approvals- in compliance with the Machinery Directive 2006/42/EC annex II 
the following harmonized standards have been applied (or parts/clauses of):
- EN1990 Eurocode - Basis of structural design
- EN1993 Eurocode 3 - Design of steel structures
Not includedsidelight tower tube 60 cm with fork set

Accessories