Balletfloor cart

Store or transport your ballet - or stagefloor with our Balletfloor cart!
The Balletfloor transporter consists of several parts from our modular transport system.
Two 110 cm fork-side panels can be combined with length profiles to design a cart with a length of 180 cm, 210 cm or 230 cm.  

BUILD A balletfloor cart STEP BY STEP

Step 1 choose the length of your cart

Choose the desired length of the cart, based on the width of your stagefloor. Length profiles are available in 180 cm, 210 cm and 230 cm.

Floor width max. 150 cm: choose the 180 cm length profiles
Floor width max. 180 cm, choose the 210 cm length profiles
Floor width max. 200 cm, choose the 230 cm length profiles

Together with two fork-side panels, with a height of 110 cm, these length profiles will create the frame for your Balletfloor cart.
Six sturdy plastic tubes are placed in the base of this cart. These tubes can be rotated with a foldable handle. After use, this handle folds between the side panel.

The thickness of your ballet - or stagefloor determines how many  meters of floor you can roll on each tube:
  • material thickness 1.6 mm: max. 30 meter floor
  • material thickness 2 mm: max. 25 meter floor
Product set carousel

Step 2 Choose castors

Now that you've created the frame for your balletfloor cart, it's time to choose which type of castors you would prefer to mount under the cart. 

Our blue Admiral castors do not leave any marks on soft surfaces such as gym floors or dance halls. We advise you to use 160 mm castors, with a load capacity of 300 kg each, to bear the weight of a fully loaded balletfloor cart.  

You can choose between different castor sets, including castors with and without brake. We strongly recommend including at least 2 castors with brake when choosing the desired castor set. 

Product set carousel

OUR TRANSPORT CARTS

Balletfloor cart

Safely store and transport ballet and dance floors with the Admiral Balletfloor cart.
Designed for professional use, the cart is built from our modular transport system elements.
Two 110 cm fork-side panels create a sturdy base for the cart.
By adding length profiles, the cart can be configured to 180 cm, 210 cm or 230 cm.
The Admiral Balletfloor cart keeps your flooring organised and easy to move between locations.

BUILD A balletfloor cart STEP BY STEP

Step 1 choose the length of your cart

Choose the correct cart length to match the width of your dance or ballet floor.
Length profiles are available in 180 cm, 210 cm and 230 cm.

•    Ballet floor width up to 150 cm: use 180 cm length profiles
•    Ballet floor width up to 180 cm: use 210 cm length profiles
•    Ballet floor width up to 200 cm: use 230 cm length profiles

Together with two fork-side panels (110 cm high), these profiles create a strong balletfloor cart frame.
The base of the cart contains six durable plastic tubes that allow the ballet floor to be rolled up.

The included folding handle, which neatly stores between the side panels after use, can be used to operate each tube.

The thickness of the ballet floor determines the roll length per tube: up to 30 metres at 1.6 mm or 25 metres at 2 mm.

Product set carousel

Step 2 Choose castors

Once the Balletfloor cart frame is complete, select the right castors for safe movement.
The blue Admiral castors are non-marking and suitable for soft floors such as gym floors, dance studios and other locations.

For a fully loaded Balletfloor cart, we recommend 160 mm castors, each with a 300 kg load capacity.
These larger castors provide stable rolling and easy handling, even with heavy floor rolls.

Castor sets are available with or without brakes.
For safety and control, we strongly advise choosing a set with at least two braked castors.

Product set carousel

OUR TRANSPORT CARTS