Calculate your exact setup
Not sure what you need? Use our Flex calculator to get your ideal ramp configuration in less than two minutes.Â
How it works:
-
Enter your stage height
Suitable for any height between 40 and 180 cm
-
Select the amount of decks
Choose between 2 and 6 decks, depending on the desired slope
-
Get a complete list of parts instantly
Easily construct stage ramps of varying heights (40 to 180 cm) with our versatile Flex Ramp system. Depending on the desired height, the ramp can consist of 2 to 6 decks and span between 4 and 12 meters in length. It can be set at various slope levels*, providing the flexibility needed for different setups, including lower slopes of up to 3 degrees.
The Flex Ramp is ideal for rolling goods like flight cases, loudspeakers and lighting equipment from floor to stage level. It is not a standalone unit and is not suitable for dynamic loads such as cars. For proper stabilisation, the Flex Ramp must always be used in combination with a stage of at least 6 x 4 metres (24m²).
The system is designed to work with Prolyte stage decks and other compatible decks**.
 * We recommend not exceeding a slope of 9 degrees when loading heavier equipment.
** The Flex Ramp is compatible with decks from Prolyte, Nivtec, Innodeck and Sixty82 Stage 82. Please note that Eurotruss decks are not compatible with the Flex Ramp.
Flex Ramp Elements
Flex Housing Set
The Flex Housing Set joins two stage decks while also functioning as the foundation of each leg. Two Flex House elements are required for a complete connection between two stage decks. These two Houses are connected together by a Brace tube, secured at the ends with locking pins.Â
| Max load | 500 kg/m2 (for the total construction, when used in combination with a stage of minimum 6 x 4 m) |
| Material | House: steel Brace: steel |
| Finish | House: zinc plated Brace: powder coated |
| Dimensions | House: 250 x 60 x 220 mm (L x W x H) Brace: 35 x 35 x 990 mm (L x W x H) |
| Weight | 10.1 kg |
| Colour | House: silver Brace: orange |
Flex Legs
These special Flex Legs come in different heights, making the Flex ramp system very flexible. Adjust each Flex Leg to the desired height within its range by turning its spindle.
| Heights | 125 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 800 mm |
| Max load | 500 kg/m2 (for the total construction, when used in combination with a stage of minimum 6 x 4 m) |
| Material | aluminium |
| Finish | sandblasted |
| Diameter | 48 mm |
| Feet | 30/120 mm min/max |
| Colour | silver |
Flex Frame
The Flex Ramp system works for stages up to 180 cm tall. To keep the ramp stable from a height of 70 cm and above, the Flex Frame is required to ensure lateral stability.Â
| Max load | 500 kg/m2 (for the total construction, when used in combination with a stage of minimum 6 x 4 m) |
| Material | steel |
| Finish | galvanised |
| Dimensions | 910 x 625 x 55 mm (L x W x H) |
| Weight | 5.6 kg |
| Colour | silver |
Finish off your ramp with our Ramp Slope
Give the Flex Ramp a smooth finish with our compact and lightweight Ramp slope. This ramp attachment hooks itself onto the stage decks for optimal safety and it's also equipped with anti-slip rubber feet.
Calculate your exact setup
Not sure what you need? Use our Flex calculator to get your ideal ramp configuration in less than two minutes.Â
How it works:
-
Enter your stage height
Suitable for any height between 40 and 180 cm
-
Select the amount of decks
Choose between 2 and 6 decks, depending on the desired slope
-
Get a complete list of parts instantly
Easily construct stage ramps of varying heights (40 to 180 cm) with our versatile Flex Ramp system. Depending on the desired height, the ramp can consist of 2 to 6 decks and span between 4 and 12 meters in length. It can be set at various slope levels*, providing the flexibility needed for different setups, including lower slopes of up to 3 degrees.
The Flex Ramp is ideal for rolling goods like flight cases, loudspeakers and lighting equipment from floor to stage level. It is not a standalone unit and is not suitable for dynamic loads such as cars. For proper stabilisation, the Flex Ramp must always be used in combination with a stage of at least 6 x 4 metres (24m²).
The system is designed to work with Prolyte stage decks and other compatible decks**.
 * We recommend not exceeding a slope of 9 degrees when loading heavier equipment.
** The Flex Ramp is compatible with decks from Prolyte, Nivtec, Innodeck and Sixty82 Stage 82. Please note that Eurotruss decks are not compatible with the Flex Ramp.
Flex Ramp elements
Flex Housing Set
The Flex Housing Set joins two stage decks while also functioning as the foundation of each leg. Two Flex House elements are required for a complete connection between two stage decks. These two Houses are connected together by a Brace tube, secured at the ends with locking pins.Â
| Max load | 500 kg/m2 (for the total construction, when used in combination with a stage of minimum 6 x 4 m) |
| Material | House: steel Brace: steel |
| Finish | House: zinc plated Brace: powder coated |
| Dimensions | House: 250 x 60 x 220 mm (L x W x H) Brace: 35 x 35 x 990 mm (L x W x H) |
| Weight | 10.1 kg |
| Colour | House: silver Brace: orange |
Flex Legs
These special Flex Legs come in different heights, making the Flex ramp system very flexible. Adjust each Flex Leg to the desired height within its range by turning its spindle.
| Heights | 125 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 800 mm |
| Max load | 500 kg/m2 (for the total construction, when used in combination with a stage of minimum 6 x 4 m) |
| Material | aluminium |
| Finish | sandblasted |
| Diameter | 48 mm |
| Feet | 30/120 mm min/max |
| Colour | silver |
Flex Frame
The Flex Ramp system works for stages up to 180 cm tall. To keep the ramp stable from a height of 70 cm and above, the Flex Frame is required to ensure lateral stability.Â
| Max load | 500 kg/m2 (for the total construction, when used in combination with a stage of minimum 6 x 4 m) |
| Material | steel |
| Finish | galvanised |
| Dimensions | 910 x 625 x 55 mm (L x W x H) |
| Weight | 5.6 kg |
| Colour | silver |
Finish off your ramp with our Ramp Slope
Give the Flex Ramp a smooth finish with our compact and lightweight Ramp slope. This ramp attachment hooks itself onto the stage decks for optimal safety and it's also equipped with anti-slip rubber feet.


English (United Kingdom)