Admiral Staging wants to offer a complete product range which can't miss essentials like clamps and safeties. In our range of TÜV certified clamps you can find aluminum Half couplers to Swivel couplers with a WLL up to 750 kg!
In addition, our well-known G- and C-clamps are included. They are fitted with a spring steel protector to keep your truss from damage when mounting the hooks.
Our so-called G-clamps have been recognized worldwide for their great quality and ease of use. These sturdy clamps are provided with a metal spring inside to avoid scratches on your truss. The Admiral G-clamps are available in galvanized steel and chemical black steel.
Another worldwide favourite are our C-clamps. Made of 25 x 6 mm steel, these are one of the most sturdy clamps of its kind. They are provided with a double riveted spring clip to avoid damage of the truss. Our C-clamps are available with a length up to 60 cm in galvanized steel and chemical black steel.
Use certified safety cables to ensure the safety of your crowd! When hanging moving heads, speakers, fixtures or other staging equipment above a crowd of people you need to use an independent, secondary safety-device according to BGV-C1 and VGB regulations. Our Admiral safety cables is BGV-C1 certified and can be used single or double stranded.
Mount your Admiral safety cables in a loop and as short as possible so that, if equipment falls, the safety cable is in the best position to absorb the weight. For static equipment the maximum drop height, in case the equipment falls, should never be more than 20 cm. The maximum drop height when using moving equipment is a lot less, only 5 cm. Always have these safety regulations in mind when mounting your staging equipment.
With Admirals' TÜV certified Swivel couplers you can mount two tubes at any angle imaginable. A great example of using this coupler would be bracing a truss with an extra tube. Connecting the couplers is much faster and easier than rotating the shackle around the tube and tightening it with a butterfly nut. Admiral Staging offers these Swivel couplers in two different sizes, 30 mm and 50 mm width. There are also two different styles, aluminum and aluminum black anodized.
The Admiral Staging Selflock coupler is a product that lives up to its name. This great coupler is a suspension hook that can be placed around a tube. After hanging a product on a bar or tube, the product's weight is directly transferred to the tube. By tightening the shackle, a highly tension-proof connection is created. Bolt, ring and butterfly nut are included. The Selflock couplers are TÜV certified and available in aluminum and aluminum black anodized.
Our wide range of Half couplers are typically used to mount luminaires and other equipment to round tubes with ease. The Half couplers are available with a width of 30 mm or 50 mm and a WLL up to 750 kg! These TÜV certified couplers are available in galvanized (silver) and black.
Our range of Admiral half couplers would not be complete without the special half coupler with lifting eye. The couplers M10 ring bolt is used for lifting loads via, for instance, soft steels, ropes or cables. These TÜV certified half couplers with lifting eye have a WLL of 200 kg and are available in galvanized (silver) and black.
The quick coupler's name tells you all you need to know. This suspension hook can be quickly placed around a tube. After hanging a product on a bar or tube, the product weight is directly transferred to the tube. By tightening the shackle, a high tension-proof connection is created. Bolt, ring and butterfly nut are included. Our Admiral quick couplers are available in galvanized (silver) and black.
The Admiral Qwiqr is the next generation sliding connector for clamps. We do have a very good reason to name this item the Qwiqr, because this clamp is quick. Slide the hook into the housing and click! Actually you will not hear one click, but two. Two separate locking switches will provide you the safest lock possible. Two outwards positioned indicators will show you the product is properly double locked and no further attention is needed. The clamp part now is secured by two individual locks. Furthermore, the clamp part is spring loaded to avoid backlash. Disassembly of the parts is even quicker. Push the clamp part inwards into the housing, press both locking switches and slide the hook outwards. It's that simple!