Mount your fixtures and transport them easily with our Sidelight tower. Sidelight towers can be equipped with moving heads, theatre luminaires and other lighting fixtures.
The position of the ladder can be symmetrical or asymmetrical, depending on the type of fixtures you want to use. While the symmetrical tower is suitable for smaller fixtures such as LED par spotlights, small moving heads, blinders or strobes, the asymmetrical one is meant for larger moving heads and profile spots.

The telescopic ladder inside the sidelight tower consist of a frame with two hanging bars: one at the top and one at the bottom. Two separate hangers with forksets are also provided, so they can be installed in the middle of the ladder frame. Moroever, the ladder has been upgraded with bearing wheels to eliminate the slack between profiles.

The ladder can be pushed upwards, allowing you to lift your lights up to 100 cm. The system can be lifted by means of a cord with handles on both sides, giving you more control when raising and lowering the ladder. A locking pin is then inserted to secure the ladder.
To safely operate the Sidelight tower, load the ladder up to 50 kg and always pull it up with two people to a maximum length of 100 cm. When the ladder is already lifted and secured, it can be loaded up to 100 kg.

An extra tube is available (WAM2P21), which can be mounted at the bottom of the Sidelight tower to create a shinlight. This tube is mounted on the outer frame of the Sidelight tower, below the ladder. 

Note: Sidelight towers always come assembled.